Once in awhile, there will be parts that stop working on your vehicle that you could probably fix yourself. It is very expensive to bring it to a professional mechanic because you have to pay for the part and labor while you could save the labor cost if you did it yourself.

Alternator

Alternator malfunction is an example where you can do the repair yourself. You might need to see whether it was actually the alternator that failed or if it was the battery or starter. In order to steer clear of the headache of making an error yourself, you could take it to a mechanic but there must be a more economical way. There are a few measures you could take to determine if the problem is the alternator or something else. The easiest though least practical would be to own machine that checks alternators but they are very expensive. But there is a more practical way to check the alternator to see if it is working.

Car Battery

Use a voltmeter and connect it to the battery of your car or truck. Then you start the car and monitor the volt meter to see if there is any voltage output. When you start the automobile, if you find the voltage on the meter increase then your alternator is okay. In the event the alternator is fine, that means there may be an issue with your battery so check to make sure everything is properly connected. If nothing arises on the voltage meter, you’ll have to replace the alternator. The next step is going to be trying to assess if you want someone else to do it for you, or if you should tackle it yourself. Regardless of how you see it, you will be paying big money for the labor and the materials.

If you like to perform the repair yourself, you can most likely get a good price on parts and the cost of labor will be just your time. You might want to find a balance to decide if it is worth to pay the high price of a certified mechanic or not. Many people have no idea of the right way to fix cars or can’t tackle the mess so hiring a mechanic is worth it. Even though doing this yourself will involve reviewing the car’s repair manual and some more tools, it is pretty straightforward once you get used to it. You can buy a completely new product or get rebuilt ones that appear to work quite well at a much less price. The best choice, if you don’t mind waiting, is to order your parts online.

For many individuals, employing a mechanic is a lot easier than fixing on your own. But if it is something you want to do, and have the time, it can save you money and give you a sense of accomplishment.

Was there actually a time when your vehicle required jumpstarting, and your battery was barely visible through all the gunk? That kind of gunk that covers the battery is actually corrosion formed by acid condensation. It may be cleaned by a basic chemical solution, since it has been formed by an acid. Something as simple as baking soda could easily clean the battery acid. You need to take some safety measures, but safe cleaning of your battery is only following a few instructions.

Safety First

You have got to first find the supplies you need, most of which are in your home. You basically need safety glasses covering your eyes, baking soda, adaptable pliers, and screwdrivers with insulated handles and a stiff-bristled brush. Other accessories you need include a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. A few sponges or maybe clean cloths, a spray bottle with an all-purpose household cleaner, some rubber gloves, and a large container of clean water. It may seem like a lot of stuff to clean the equipment, but it will keep it safe and non-hazardous.

A lot of the corrosive by-products possess sulfuric acid, so it is a wise idea to use the safety glasses to protect your eyes, and the rubber gloves for your hands. You’ll want to keep this substance away from your car, because it can eat away the paint. Depending on how corroded the battery might be, the amount of cleaning that is needed will be different. To be able to totally get rid of the dirt and corrosion, you will need to take the battery out of the vehicle. First, use the plastic or metal scraper to get off just about any dirt it is possible to, and also use the bristle brush.

Making the Cleaning Solution

The next thing to perform should be to mix one tablespoon of baking soda along with one pint of water then use it to clean the battery and the cable connections using the turkey baster. Work the formula of baking soda inside the heavily corroded areas with the brush, and disconnect the battery cables from the terminals for easier cleaning. You’ll be able to take away the cables, starting with negative first then positive, using the pliers and wrenches. For those terminals and other parts, utilize the brush again to remove the corrosion and do a flush using the baking soda solution.

You can use the bottle of spray cleaner and sponge to get rid of any excess dirt and grease. Dry everything off using a clean cloth and reassemble everything the way you took it apart, reconnecting the positive first. Lastly, be sure that everything is anchored and now you have a clean and safe battery.